| Model Number |
ZAY7045FG |
| Dimensions & Weights |
40.5"/1030mm(w),
30.0"/760mm(d), 57.25"/1450mm(h-max) |
|
ship: 30.5"/775mm,
35.0"/890mm, 45.0"/1145mm (l*w*h), ~800/875 lbs |
| Table Size |
31.5"/800mm (X) * 9.5"/240mm
(Y) |
| Table Travel |
20.7"/525mm (X) * 9.2"/234mm
(Y); English/Inch Leadscrews & Dials
|
| Spindle Column |
square column/dovetail ways;
travel: 15.75"/400mm; clearances: 17.75"/450mm
|
|
spindle-to-table
(max), 10.25"/260mm
spindle-axis-to-column (min) |
| Spindle Capacities |
2hp(1.5kw) motor, 6
gear-selectable speeds(95-1500 rpm), R8 taper, |
|
5.1"/130mm Z-travel w/
coarse & fine feed, ±90o X-Z swivel |
| Spindle Controls |
Three-position Spindle
Control Switch: Forward, Off, Reverse |
| Spindle Power |
110V@13.6A - 220V@6.8A,
Single-Phase, 60 Cycle AC |
| Max Tool Capacities |
Drill: 1.75″/45mm; Shell
Mill: 3.15″/80mm; End Mill: 1.25″/32mm; Tap: 0.5"/12mm |
| SimpleDRO System |
Preinstalled: • Three (3)
SimpleDRO Axis Scale Units, optical scales w/encoders - |
|
±0.0005"(±0.01mm) • One (1) SimpleDRO Display Unit • One (1) Universal
Power |
|
Supply, 5V@2A • Three (3)
Signal Cables @ 3m/10'
|
| Standard Accessories |
• Allen Key Set (3,4,5,6mm) • Wrench (22/24mm)
• Screwdriver (6") • Wedge |
|
• R8 Collet Chuck & 8-pc
Collet Set(M4-16) • T-Nut Hold-down Kit
|
|
• 3"/76mm Shell Mill (R8) • 5"/125mm
Milling Vise w/grad swivel base |
|
• 0.625"/16mm JT33 Drill Chuck w/R8:JT33 arbor & key
|
| Optional Accessories |
Machine Base/Table |
| Warranty |
Mill: 1-Year from
Manufacturer; SimpleDRO: 2-Year from ESP |
| Pricing |
$2649 USD - FOB,
Quakertown,
PA 18951 |
